Prevent Utility Strikes: The Ultimate HSG47 Training Guide

What is the Underground Services Danger Avoidance Course?

One training course that describes the possible risks of working close to subsurface utilities is the HSG47 training. It also gives employees advice on how to lower direct hazards to people's health and safety as well as indirect dangers brought on by service harm.

For Whom Is The HSG47 Training Course Intended?

Personnel who must oversee or do excavation work on a site are the target audience for this class.

What Are You Going To Discover In The HSG47 Training Course?

Participants in this session will gain the knowledge they need to understand HSG47 requirements. Additionally, in a high-voltage substation setting, students will learn how to be safe from underground utilities. Participants will additionally benefit from the course by:

● Recognise how to use the signal generator and cable avoidance tool in this kind of setting.

● Explain the issues that arise when using cable avoidance technology on a building site.

● Describe the HSG47 requirements.

● Explain the risks associated with subterranean services.

● Explain the HSG47 work planning criterion.

● Describe how utility searches and plans help prevent subterranean services.

● Explain the underground mapping procedure.

● Describe the safety system requirements for operation in compliance with HSG47.

● Describe the process used to avoid cables and pipes.

● Explain the procedures utilised to assist guarantee safe excavation.

● Describe the prerequisites for backfilling.

● Explain the use of alternate digging technology.

● Explain how to handle "the unknown service."

After finishing this course, students will know how to properly use the CAT & Genny. Students will also understand the HSE Guidance HSG47 and its relevance to the workplace.

Certification and Evaluations

Before and throughout the course, practical examinations are used to evaluate the course. As they wait for their card to be granted by Energy and Utility Skills (EUSR), students who complete the Avoiding Danger from Underground Services course are handed a cover note attesting to their completion of the training and exam.

After the HSG47 training date, registration on EUSR is good for three years.

The HSG47 Training's Objectives

Refreshing the delegate's knowledge of the following is the goal of this  HSG47 training:

● HS (G) 47's standards for preventing damage to underground services

● The consequences of damaging subterranean utilities

● Use of cable avoidance tools in the workplace

● Safe excavation practices

● Alternative excavation methods, include air lance and hydro excavation technologies

Those who are involved in the planning, designing, and carrying out of work where the ground's surface is penetrated and have previously completed the entire HS(G) 47 training, or those who need to brush up on their knowledge of the risks connected to underground services and the methods used to prevent them need this training.

What to Expect from the Best HSG47 Training Program

During construction works, there’s a lot of excavation required, and this poses great risks. Buried services are common across the country, and you must equip your workers with prerequisite skills on handling them. Complying with HSG47 (Avoiding Danger from Underground Services) is imperative for all contractors. HSG47 Training is crucial for the construction industry as it prepares workers in handling underground services. This course gives your company an edge in the business as your team will work more efficiently.

Leveraging HSG47 Courses
Underground services offer crucial services to communities across the country. From telecommunication, electricity, drinking water, sewage to alarm and signals, these underground lines are critical.

Damage to buried services can lead to inordinate delays, which will increase the cost of your projects.  Without the necessary skills, your workers are also at risk when handling these buried services. This could lead to debilitating workers’ compensation suits.

To make matters worse, your company might suffer stiff fines and penalties from the authorities and other liability claims from utility providers. More importantly, contractors in the construction industry must comply with the HSE HSG47 guidance Avoiding Danger from Underground Services.

All these reasons make it necessary for your workers to learn more about underground services. This is where training for your workers in HSG47 (Avoiding Danger from Underground Services) comes into play.

The course is necessary for everyone involved in the planning, designing and execution of excavation works. It covers avoidance of damage to underground services, underground services colour coding system, safe digging practises, using CAT and Genny to detect underground services, underground mapping technology and much more.

If there is a risk of damage to buried services, it is important to have skilled technicians handling your project.

Need the best from your construction teams? It is time to equip them in the HSE HSG47-Avoiding Danger from Underground Services.

Hsg47 Training. What’s It All About?

Many people are unsure what HSG47 training is all about. HSG47 is the guide to commissioning, planning, managing, and carrying out work on or near to underground services, that is produced by the Health and Safety Executive. The latest edition, which is the third, was produced in 2014 and still stands today.

The HSG47 course that we provide here at Sygma Solutions trains all those involved in the location and identification of underground services to the standard laid down by HSG47.

The fact is that underground services can be absolutely anywhere. You might expect to find them in the local high street, since there will be telephone cables, electricity cables, water pipes, sewage pipes, possibly gas pipes, and more, supplying all of the shops, restaurants, bars, and offices that are there.

Read More Visit - HSG47 training

HSG47 Guidance From The HSE

HSG47 is guidance from the Health and Safety Executive on how to avoid the dangers from striking underground services when carrying out any sort of excavation work. It is the latest, and third, edition, and was issued in 2014.

As the HSE says, the guidance applies to anywhere that underground services may be found, such as street works; road works; excavation, digging, and piling; demolition and site remediation; site investigation surveys; and “any other work that involves penetrating the ground at or below surface level.” In other words, everywhere. They could have just used the last one and that would have covered it!

The sad fact is that there are some 60,000 strikes of underground services in the UK every year, many causing serious injury, and some of which are fatal. This is despite the fact that responsible contractors do take the trouble to carry out a site survey before they begin digging, using the two main tools, which are the CAT and the Genny.

The problem appears to be that many contractors do not understand the limitations of these two tools, and their surveyors have not been trained in their correct use on a fully-fledged HSG47 training course. If that were not the case, how would there be about 230 utility strikes every working day of the year? It simply wouldn’t happen.

This is why, if you are a contractor involved in any sort of work which involves ground penetration, you should ensure that your surveyors attend an HSG47 course which will teach everything that there is to know about the CAT and Genny, including – most importantly – their limitations. They do have certain limitations: for example, the depth to which they can read. This is just one reason why you should only dig down a foot in an area believed free of utilities because it may be the case that they are actually there, but that the CAT and Genny couldn’t locate them. So you need to check again before digging further.

What Is Involved In The Training In the Use Of The RD7000?

Locating pipes, cables, and markers underground is becoming increasingly complex. The operator’s job is more time consuming as the effects of ground distortion caused by different soil types and close proximity to other conductors take effect.

Any locator needs to be easy to use, highly accurate, and reliable, and the RD7000 meets these requirements. However, you can’t just take it out of the box and hit “go”. You need RD7000 training in its’ proper use in order to get the best out of it. 

This equipment is ergonomically designed and is lightweight which enables the operator to use it for long periods without tiring. It is also energy efficient and very well balanced which makes it comfortable to hold. Notwithstanding its light weight, it has an IP54 rating which means that it can be used in any environment. 

Read More Original Content at HSG47 training

Reasons Why You Need Cable Avoidance Equipment

Cable avoidance equipment can identify current strength, the depth of the buried cable or pipe, and location accessories to help contractors safely perform their job. There are three other key reasons why you need cable avoidance equipment:

1. Safety

Underground cables can have live electricity running through them, harmful chemicals, or other waste products. Cutting into the ground ‘blind’ is a recipe for disaster. Cable avoidance equipment adds a line of defence to this, to increase safety.

2. Compliance

Health and safety guidelines stipulate that it is the responsibility of the employer and the employee to use safe working practices. Cutting into the ground or removing ground without first adequately checking for cables is considered extremely high risk.

3. Do a proper job

Cable avoidance equipment can vastly reduce the chance of hitting a live cable or a gas or water pipe and is essential to all utility companies and contractors. By adequately identifying underground cables and avoiding any damage to them, contractors can do a proper job without any inefficiencies. This saves time and money.

Read more on : RD7000 Training